Description

ClimaSet R134a refrigerant

ClimaSet contains everything you need for a quick and hassle-free refill of your car’s air conditioning system. It contains a safe and effective replacement for R134a /R12 refrigerant for cars manufactured up to 2016.

FEATURES AND APPLICATION:

Safe for you and your car: ClimaSet uses a natural hydrocarbon gas that is non-toxic and does not contribute to the greenhouse effect.
Easy to use: even if you have never filled your air conditioning before, you can do it with ClimaSet. The intuitive hose with pressure gauge makes it easy to read the pressure and fill the system.
Speed and efficiency: with ClimaSet you can fill your air conditioner in just 10 minutes. In addition, the gas used is 35% more efficient than traditional R134a refrigerant, which means lower fuel consumption and better cooling.
Universal: ClimaSet is suitable for all car models manufactured between 1994 and 2016 that use R134a refrigerant.
Environmentally friendly: The ClimaSet pressure gauge cable is reusable and the packaging is recyclable.

ADDITIONAL INFORMATION:

EasyKlima, ACDOCTOR pressure gauge tubes fit ClimaSet cans.
One pack contains 235 g of refrigerant, equivalent to 626/705 g of R134/R12.

Hose with pressure gauge for filling up car air conditioners

The hose with pressure gauge for auto air conditioning filling is designed for all cars. The hose is the tool needed to measure the pressure and then fill the car air conditioning system. It is reusable, making it environmentally friendly.

HP/LP adapter

The HP (high pressure) and LP (low pressure) adapter is required to top up the air conditioning system in cars such as:

Audi A4 B4 1994

Ford Fiesta 2007

Ford Galaxy 2009

Ford Transit 2009

Kia Ceed 2007

Nissan Qashqai 2015 and 2016

Mazda 2015

Mitsubishi Colt 2006

Renault Laguna 2

Renault Mégane 2

Renault Trafic 2

Renault Clio 2

Renault Espace 2

Renault Master 2

Renault Scenic 2

Renault Vel Satis 2

Ford S-Max

If you cannot find an LP port (11 mm diameter) under the bonnet of your car, you can upgrade the air conditioning with an HP port (14 mm diameter) using an LP/HP reducer/adapter.

Additional information

Brand	ClimaSet
Capacity	235 g

METHOD OF USE

ClimaSet instructions
1. Start the car engine, turn on the air conditioning to minimum temperature and maximum supply.
2. Open the car bonnet, find the low pressure port (marked LP) and unlock it.
3. Unscrew the valve from the hose with the pressure gauge and screw it into the factor tank.
4. Connect the kit to the LP port and invert the container.
5. Turn off the valve and start charging the refrigerant.
6. When the pointer on the gauge reaches 40 psi unscrew the valve, then disconnect the gauge (reusable can).
7. Disconnect the kit from the car's LP port and enjoy a working A/C.

To fill the A/C yourself, you will need an A/C fill line and a pressure gauge line sealed with a quick-release coupling to connect to the low-pressure port marked with the letters LP (11 mm in diameter). The A/C system usually has two ports for filling the system (one marked with the letters LP with a diameter of 11 mm and the other marked with the letters HP with a diameter of 14 mm), but by design the hose only fits into one LP port (with a diameter of 11 mm). This means you don't have to worry about connecting the kit to the wrong port.

Pressure gauge indication
• The pressure gauge indicates a pressure of less than 25 psi, which means that the A/C system pressure is too low. If the A/C system pressure is too low, add refrigerant until the gauge indication reaches between 25 and 55 psi.
• The pressure on the pressure gauge is between 25 and 55 psi - this means that the A/C system pressure is correct. This means that the air conditioning system is well filled.
• The pressure gauge indicates a value above 55 psi - this means that the pressure in the system is too high. If the A/C system pressure is too high, lower it.

Table of pressures depending on ambient temperature
Low pressure indicator / pressure gauge	Ambient temperature
25-35 psi	18° C
35-40 psi	21° C
35-45 psi	24° C
40-50 psi	27° C
45-50 psi	29° C
45-55 psi	32° C
50-55 psi	35° C
50-55 psi	38° C
50-55 psi	41° C
50-55 psi	43° C

HP/LP adapter
The HP (high pressure) to LP (low pressure) adapter is required to top up the air conditioning system with R134a refrigerant on cars such as:
Audi A4 B4 1994, Ford Fiesta 2007, Ford Galaxy 2009, Ford Transit 2009, Kia Ceed 2007, Nissan Qashqai 2015 and 2016, Mazda 2015, Mitsubishi Colt 2006, Renault Laguna 2, Renault Mégane 2, Renault Trafic 2, Renault Clio 2, Renault Espace 2, Renault Master 2, Renault Scenic 2, Renault Vel Satis 2, Ford S-Max.
If you do not find an LP port (with a diameter of 11mm) under the bonnet of your car, you can top up the air conditioning via an HP port (with a diameter of 14mm) using an LP/HP reducer/adapter.

SAFETY MEASURES

Hazard. Highly flammable gas. Contains gas under pressure; may explode if heated. Keep away from heat sources, hot surfaces, sparks, open flames and other sources of ignition. Do not smoke. IF ON SKIN: Wash with plenty of water. In case of skin irritation or rash: consult a doctor. Eliminate all sources of ignition if safe to do so. Store in a well-ventilated place. Protect from sunlight. In case of ignition of escaping gas; do not extinguish. Contains (R)-p-menta-1,8-diene. May cause an allergic reaction.

ClimaSet refrigerant R134a / R12 235g, hose, LP / HP adapter

ClimaSet R134a refrigerant

Hose with pressure gauge for filling up car air conditioners

HP/LP adapter

ClimaSet 3in1 (refrigerant R134a, oil, sealant), Pressure gauge hose

ClimaSet 3in1 refrigerant R134a, oil, sealant

ClimaSet koelmiddel R134a / R12 235g x2