Description

ClimaSet 4in1 UV Dye, Oil, Refrigerant, Sealant

Name: ClimaSet 4in1 gas R134 a / R12 UV dye, oil, refrigerant, sealant
Brand: ClimaSet
SKU: P-U-0003
Availability: InStock

• UV stain
• oil
• gas R134a
• sealant

ClimaSet 4in1 is an advanced refrigerant replacement that has been specifically developed for use in the air conditioning systems of vehicles manufactured up to 2016. It is an all-in-one solution that combines four key functions (system oiling, refrigerant top-up, system sealing, system integrity verification) for excellent performance and convenience.

CHARACTERISTICS AND APPLICATIONS
• self-application in 5 min
• R12/ R134a replacement for vehicles manufactured up to 2016 (see list of models requiring an adaptor)
• UV dye helps locate gas leaks in the A/C system
• 4in1 seals small leaks in the system (a small leak is one where gas escapes for more than a month)
• the product is lighter than the original refrigerant and 30% more efficient (lighter gas means less load on the A/C system, which increases its lifetime)

ADDITIONAL INFORMATION
• our refrigerant weighs 235g, which is equivalent to 626g of gas
• please note that naturally 10% of the refrigerant is lost from the A/C system each year
• a line is required for each can in order to properly refill the A/C system
• use a UV torch to locate the leak. the UV dye will glow when exposed to the UV light from the torch, revealing the leak (available as part of a 4-in-1 kit)

Additional information

Brand	ClimaSet
Capacity	235 g

METHOD OF USE

ClimaSet instructions
1. Start the car engine, turn on the air conditioning to minimum temperature and maximum supply.
2. Open the car bonnet, find the low pressure port (marked LP) and unlock it.
3. Unscrew the valve from the hose with the pressure gauge and screw it into the factor tank.
4. Connect the kit to the LP port and invert the container.
5. Turn off the valve and start charging the refrigerant.
6. When the pointer on the gauge reaches 40 psi unscrew the valve, then disconnect the gauge (reusable can).
7. Disconnect the kit from the car's LP port and enjoy a working A/C.

To fill the A/C yourself, you will need an A/C fill line and a pressure gauge line sealed with a quick-release coupling to connect to the low-pressure port marked with the letters LP (11 mm in diameter). The A/C system usually has two ports for filling the system (one marked with the letters LP with a diameter of 11 mm and the other marked with the letters HP with a diameter of 14 mm), but by design the hose only fits into one LP port (with a diameter of 11 mm). This means you don't have to worry about connecting the kit to the wrong port.

Pressure gauge indication
• The pressure gauge indicates a pressure of less than 25 psi, which means that the A/C system pressure is too low. If the A/C system pressure is too low, add refrigerant until the gauge indication reaches between 25 and 55 psi.
• The pressure on the pressure gauge is between 25 and 55 psi - this means that the A/C system pressure is correct. This means that the air conditioning system is well filled.
• The pressure gauge indicates a value above 55 psi - this means that the pressure in the system is too high. If the A/C system pressure is too high, lower it.

Table of pressures depending on ambient temperature
Low pressure indicator / pressure gauge	Ambient temperature
25-35 psi	18° C
35-40 psi	21° C
35-45 psi	24° C
40-50 psi	27° C
45-50 psi	29° C
45-55 psi	32° C
50-55 psi	35° C
50-55 psi	38° C
50-55 psi	41° C
50-55 psi	43° C

HP/LP adapter
The HP (high pressure) to LP (low pressure) adapter is required to top up the air conditioning system with R134a refrigerant on cars such as:
Audi A4 B4 1994, Ford Fiesta 2007, Ford Galaxy 2009, Ford Transit 2009, Kia Ceed 2007, Nissan Qashqai 2015 and 2016, Mazda 2015, Mitsubishi Colt 2006, Renault Laguna 2, Renault Mégane 2, Renault Trafic 2, Renault Clio 2, Renault Espace 2, Renault Master 2, Renault Scenic 2, Renault Vel Satis 2, Ford S-Max.
If you do not find an LP port (with a diameter of 11mm) under the bonnet of your car, you can top up the air conditioning via an HP port (with a diameter of 14mm) using an LP/HP reducer/adapter.

SAFETY MEASURES

Back to products

ClimaSet 4in1 gas R134 a / R12 UV dye, oil, refrigerant, sealant

-14%

Original price was: £35.78.Current price is: £30.84. (includes VAT)

Lowest price in the last 30 days: £30.84

Add £9.94 to your shopping basket and get free shipping!

If you place your order by 12 noon it will be dispatched the same day.

SKU: P-U-0003 Categories: A/C, Factors, R12, R134a

Brand	ClimaSet
Capacity	235 g

Table of pressures depending on ambient temperature
Low pressure indicator / pressure gauge	Ambient temperature
25-35 psi	18° C
35-40 psi	21° C
35-45 psi	24° C
40-50 psi	27° C
45-50 psi	29° C
45-55 psi	32° C
50-55 psi	35° C
50-55 psi	38° C
50-55 psi	41° C
50-55 psi	43° C

ClimaSet 4in1 gas R134 a / R12 UV dye, oil, refrigerant, sealant

ClimaSet 4in1 UV Dye, Oil, Refrigerant, Sealant

ClimaSet 3in1 (refrigerant R134a, oil, sealant)x2, Pressure gauge hose

ClimaSet 3in1 refrigerant R134a, oil, sealant

ClimaSet 3in1 XL (refrigerant R1234yf, oil, sealant), hose, adapter R1234y

HP/LP adapter for air conditioning

INFORMATION

ABOUT US

HELP

ClimaSet 4in1 gas R134 a / R12 UV dye, oil, refrigerant, sealant

ClimaSet 4in1 UV Dye, Oil, Refrigerant, Sealant

Related products

ClimaSet 3in1 (refrigerant R134a, oil, sealant)x2, Pressure gauge hose

ClimaSet 3in1 refrigerant R134a, oil, sealant

ClimaSet 3in1 XL (refrigerant R1234yf, oil, sealant), hose, adapter R1234y

HP/LP adapter for air conditioning